Disarm: Enter your Code
Check Faulted Zones: Press the [>] key to scroll through the open zones.
Bypass Zones: Enter [*][1] then scroll to the zone to be bypassed and press [*].
Smoke Detector Reset: Silence the alarm by entering you Code. Press [*][4] to reset.
* If smoke has not cleared, the alarm may resound. Clear the detector of smoke and repeat the sequence to reset.
Chime Mode On/Off: Enter [*] [6] + [Access Code]. Scroll to the [Door Chime] feature and press [*] to turn on or off.
Change Code: It is recommended that you contact your security company and make changes under their direction.
Enter [*] [5] + [Master Code] + [User Number 001-128]. You may also scroll through the list and press [*] to select a user number. Press [0] to add a new code + [New Code] or [1] to delete an existing code. Press [#] to exit the menu.
*Codes may be four or six digits.
Power Down: Pull one wire off the battery. Then unplug the panel transformer if you know where it is. It is a beige or black box plugged into a nearby power outlet. If you can’t find it, then disconnect the wire on the far left terminal of the terminal strip (the first 2 terminals on the left are AC power).
User Manual: 4010 Manual
User Manual: 4020 Manual